SKU: dc3516
Categories: Drills, Drills
Lance drill compressive 3.5 . length . 16 mm

SKU: d5516
Category: R 5.5
Drill for R5516
5.5 . length . 16 mm

SKU: d5514
Category: R 5.5
Drill for R5514
5.5 . length . 14 mm

SKU: d5512
Category: R 5.5
Drill for R5512
5.5 . length . 12 mm

SKU: d5510
Category: R 5.5
Drill for R5510

5.5 . length . 10 mm

SKU: d5508
Category: R 5.5
Drill for R5508

5.5 . length . 8 mm

SKU: d5506
Category: R 5.5
Drill for R5508
5.5 . length . 6 mm

SKU: d5016
Category: R 5.0
Drill for R5016
5.0 . length . 16 mm

SKU: d4816
Category: R 4.8
Drill for R4816

4.8 . length . 16 mm

SKU: d4814
Category: R 4.8
Drill for R4814

4.8 . length . 14 mm

SKU: d4812
Category: R 4.8
Drill for R4812

4.8 . length . 12 mm

SKU: d4810
Category: R 4.8
Drill for R4810
4.8 . length . 10 mm

SKU: d4808
Category: R 4.8
Drill for R4808
4.8 . length . 8 mm

SKU: d4216
Category: R 4.2
Drill for R4216
4.2 . length . 16 mm

SKU: d4216
Category: R 4.2
Drill for R4216
4.2 . length . 16 mm

SKU: d4214
Category: R 4.2
Drill for R4214

4.2 . length . 14 mm

SKU: d4212
Category: R 4.2
Drill for R4212

4.2 . length . 12 mm

SKU: d4208
Category: R 4.2
Drill for R4208
4.2 . length . 8 mm

SKU: d4216
Category: R 4.2
Drill for R4216
4.2 . length . 16 mm

SKU: d3816
Category: R 3.8
Drill for R3816

3.8 . length . 16 mm

SKU: d3516
Category: R 3.5
Drill for R3516

3.5 . length . 16 mm

SKU: d3510
Category: R 3.5
Drill for R3510

3.5 . length . 10 mm

SKU: d2014
Category: Twist drills
Twist drill, diameter 2.0 mm,
length 14 mm

SKU: d2010
Category: Twist drills
Twist drill, diameter 2.0 mm,
length 10 mm

SKU: d2008
Category: Twist drills
Twist drill, diameter 2.0 mm,
length 8 mm

Introducing our revolutionary Dental Implant Cervical Former, meticulously crafted from a biocompatible Silicone material to ensure the highest standards of safety and patient comfort.

ROOTT Dental Implant. compressive type. diameter 5.5 mm. length 6 mm. material Ti6Al4V

ROOTT C implant is a one-piece compressive type implant that is specially designed to provide perfect primary stability and is used in clinical situations when horizontal alveolar ridge atrophy is observed.

It can be used in combination with basal implants and allows flap and flapless placement.

It has a unique feature to be bent. This feature makes the prosthetic treatment easier.

The length of the neck is 3 mm.

Divergence or convergence up to 10˚ is possible between this type of implants because the slope of the abutment is 5˚.

If the divergence or convergence between this type of implants is found more than 5˚ then the abutment can be grinded.

The abutment is designed for cemented or conometric (telescopic) type of fixation as well.

Can be used with caution to create single restorations in situations where high primary stability is achieved on placement.

Bendable neck

Depending on the length of the implant the abutment can be bent up to 15 degrees, as long as the implant is placed with high primary stability.

ROOTT Dental Implant, compressive type, diameter 5.0 mm, length 12 mm, multiunite, material: Ti6Al4V.

ROOTT M implant with regular multi-unit type abutment is designed just for screw-retained prostheses;

It has a compression thread, just like the other Compressive implants.

Divergence or convergence up to 60˚ is possible between these types of implants because the slope of the abutment is 30˚.

Implant abutment is unique because it has 2,5mm ø fixation screw such dimensions of the screw gives big mechanical resistance comparing to regular 1.6-1.8mm ø fixation screw that can be found in other systems.

It can be used not only for full arc fixed dental prostheses.

The implant’s abutment is similar to M abutment or ROOTT P implant’s abutment.

It can be used in combination with ROOTT P, ROOTT S and ROOTT R implants with multi-unit abutments and allows flap and flapless placement.

Advantages of ROOTT M:

Simple placement
Rich variety of prosthetic solutions
Cement free
Immediate loading
Excellent primary stability in all types of bone
Resistant to higher loads in comparing with ROOTT S
ROOTT M implant packaging

Each implant is delivered in a sterile package with a multifunctional carrier, a two-component holder and labels for clinical records.

Content of each box:

Sterile blister with ROOTT M implant
Multifunction carrier with fixing screw
Two-component holder
Labels for clinical records

ROOTT Dental Implant. compressive type. diameter 5.0 mm. length 8 mm. material Ti6Al4V

ROOTT C implant is a one-piece compressive type implant that is specially designed to provide perfect primary stability and is used in clinical situations when horizontal alveolar ridge atrophy is observed.

It can be used in combination with basal implants and allows flap and flapless placement.

It has a unique feature to be bent. This feature makes the prosthetic treatment easier.

The length of the neck is 3 mm.

Divergence or convergence up to 10˚ is possible between this type of implants because the slope of the abutment is 5˚.

If the divergence or convergence between this type of implants is found more than 5˚ then the abutment can be grinded.

The abutment is designed for cemented or conometric (telescopic) type of fixation as well.

Can be used with caution to create single restorations in situations where high primary stability is achieved on placement.

Bendable neck

Depending on the length of the implant the abutment can be bent up to 15 degrees, as long as the implant is placed with high primary stability.