Implants
Healing Abutments
Transfers
Abutments

ROOTT M One-Piece Dental Implant diameter 3.5 mm,length 18 mm ROOTT Dental Implant, compressive type, diameter 3.5 mm, length 18 mm, multiunit, material: Ti6Al4V. ROOTT M implant with regular multi-unit type abutment is designed just for screw-retained prostheses; It has a compression thread, just like the other Compressive implants. Divergence or convergence up to 60˚ is possible between these types of implants because the slope of the abutment is 30˚. Implant abutment is unique because it has 2,5mm ø fixation screw such dimensions of the screw gives big mechanical resistance comparing to regular 1.6-1.8mm ø fixation screw that can be found in other systems. It can be used not only for full arc fixed dental prostheses. The implant’s abutment is similar to M abutment or ROOTT P implant’s abutment. It can be used in combination with ROOTT P, ROOTT S and ROOTT R implants with multi-unit abutments and allows flap and flapless placement. Advantages of ROOTT M: Simple placement Rich variety of prosthetic solutions Cement free Immediate loading Excellent primary stability in all types of bone Resistant to higher loads in comparing with ROOTT S ROOTT M implant packaging Each implant is delivered in a sterile package with a multifunctional carrier, a two-component holder and labels for clinical records. Content of each box: Sterile blister with ROOTT M implant Multifunction carrier with fixing screw Two-component holder Labels for clinical records 3,300.00 EGP 3300.0 EGP	Analog Of Multiunite ANM Analog of multiunite. material : SS 650.00 EGP 650.0 EGP	ROOTT M One-Piece Dental Implant diameter 3.5 mm,length 16 mm ROOTT Dental Implant, compressive type, diameter 3.5 mm, length 16 mm, multiunite, material: Ti6Al4V. ROOTT M implant with regular multi-unit type abutment is designed just for screw-retained prostheses; It has a compression thread, just like the other Compressive implants. Divergence or convergence up to 60˚ is possible between these types of implants because the slope of the abutment is 30˚. Implant abutment is unique because it has 2,5mm ø fixation screw such dimensions of the screw gives big mechanical resistance comparing to regular 1.6-1.8mm ø fixation screw that can be found in other systems. It can be used not only for full arc fixed dental prostheses. The implant’s abutment is similar to M abutment or ROOTT P implant’s abutment. It can be used in combination with ROOTT P, ROOTT S and ROOTT R implants with multi-unit abutments and allows flap and flapless placement. Advantages of ROOTT M: Simple placement Rich variety of prosthetic solutions Cement free Immediate loading Excellent primary stability in all types of bone Resistant to higher loads in comparing with ROOTT S ROOTT M implant packaging Each implant is delivered in a sterile package with a multifunctional carrier, a two-component holder and labels for clinical records. Content of each box: Sterile blister with ROOTT M implant Multifunction carrier with fixing screw Two-component holder Labels for clinical records 3,300.00 EGP 3300.0 EGP	ROOTT M One-Piece Dental Implant diameter 4 mm,length 8 mm ROOTT Dental Implant, compressive type, diameter 4.0 mm, length 8 mm, multiunite, material: Ti6Al4V. ROOTT M implant with regular multi-unit type abutment is designed just for screw-retained prostheses; It has a compression thread, just like the other Compressive implants. Divergence or convergence up to 60˚ is possible between these types of implants because the slope of the abutment is 30˚. Implant abutment is unique because it has 2,5mm ø fixation screw such dimensions of the screw gives big mechanical resistance comparing to regular 1.6-1.8mm ø fixation screw that can be found in other systems. It can be used not only for full arc fixed dental prostheses. The implant’s abutment is similar to M abutment or ROOTT P implant’s abutment. It can be used in combination with ROOTT P, ROOTT S and ROOTT R implants with multi-unit abutments and allows flap and flapless placement. Advantages of ROOTT M: Simple placement Rich variety of prosthetic solutions Cement free Immediate loading Excellent primary stability in all types of bone Resistant to higher loads in comparing with ROOTT S ROOTT M implant packaging Each implant is delivered in a sterile package with a multifunctional carrier, a two-component holder and labels for clinical records. Content of each box: Sterile blister with ROOTT M implant Multifunction carrier with fixing screw Two-component holder Labels for clinical records 3,300.00 EGP 3300.0 EGP
ROOTT M One-Piece Dental Implant diameter 4 mm,length 14 mm ROOTT Dental Implant, compressive type, diameter 4.0 mm, length 14 mm, multiunite, material: Ti6Al4V. ROOTT M implant with regular multi-unit type abutment is designed just for screw-retained prostheses; It has a compression thread, just like the other Compressive implants. Divergence or convergence up to 60˚ is possible between these types of implants because the slope of the abutment is 30˚. Implant abutment is unique because it has 2,5mm ø fixation screw such dimensions of the screw gives big mechanical resistance comparing to regular 1.6-1.8mm ø fixation screw that can be found in other systems. It can be used not only for full arc fixed dental prostheses. The implant’s abutment is similar to M abutment or ROOTT P implant’s abutment. It can be used in combination with ROOTT P, ROOTT S and ROOTT R implants with multi-unit abutments and allows flap and flapless placement. Advantages of ROOTT M: Simple placement Rich variety of prosthetic solutions Cement free Immediate loading Excellent primary stability in all types of bone Resistant to higher loads in comparing with ROOTT S ROOTT M implant packaging Each implant is delivered in a sterile package with a multifunctional carrier, a two-component holder and labels for clinical records. Content of each box: Sterile blister with ROOTT M implant Multifunction carrier with fixing screw Two-component holder Labels for clinical records 3,300.00 EGP 3300.0 EGP	ROOTT M One-Piece Dental Implant diameter 3.5 mm,length 14 mm ROOTT Dental Implant, compressive type, diameter 3.5 mm, length 14 mm, multiunite, material: Ti6Al4V. ROOTT M implant with regular multi-unit type abutment is designed just for screw-retained prostheses; It has a compression thread, just like the other Compressive implants. Divergence or convergence up to 60˚ is possible between these types of implants because the slope of the abutment is 30˚. Implant abutment is unique because it has 2,5mm ø fixation screw such dimensions of the screw gives big mechanical resistance comparing to regular 1.6-1.8mm ø fixation screw that can be found in other systems. It can be used not only for full arc fixed dental prostheses. The implant’s abutment is similar to M abutment or ROOTT P implant’s abutment. It can be used in combination with ROOTT P, ROOTT S and ROOTT R implants with multi-unit abutments and allows flap and flapless placement. Advantages of ROOTT M: Simple placement Rich variety of prosthetic solutions Cement free Immediate loading Excellent primary stability in all types of bone Resistant to higher loads in comparing with ROOTT S ROOTT M implant packaging Each implant is delivered in a sterile package with a multifunctional carrier, a two-component holder and labels for clinical records. Content of each box: Sterile blister with ROOTT M implant Multifunction carrier with fixing screw Two-component holder Labels for clinical records 3,300.00 EGP 3300.0 EGP	ROOTT M One-Piece Dental Implant diameter 3 mm,length 14 mm ROOTT Dental Implant, compressive type, diameter 3.0 mm, length 14 mm, multiunite, material: Ti6Al4V. ROOTT M implant with regular multi-unit type abutment is designed just for screw-retained prostheses; It has a compression thread, just like the other Compressive implants. Divergence or convergence up to 60˚ is possible between these types of implants because the slope of the abutment is 30˚. Implant abutment is unique because it has 2,5mm ø fixation screw such dimensions of the screw gives big mechanical resistance comparing to regular 1.6-1.8mm ø fixation screw that can be found in other systems. It can be used not only for full arc fixed dental prostheses. The implant’s abutment is similar to M abutment or ROOTT P implant’s abutment. It can be used in combination with ROOTT P, ROOTT S and ROOTT R implants with multi-unit abutments and allows flap and flapless placement. Advantages of ROOTT M: Simple placement Rich variety of prosthetic solutions Cement free Immediate loading Excellent primary stability in all types of bone Resistant to higher loads in comparing with ROOTT S ROOTT M implant packaging Each implant is delivered in a sterile package with a multifunctional carrier, a two-component holder and labels for clinical records. Content of each box: Sterile blister with ROOTT M implant Multifunction carrier with fixing screw Two-component holder Labels for clinical records 3,300.00 EGP 3300.0 EGP	ROOTT M One-Piece Dental Implant diameter 5 mm,length 10 mm ROOTT Dental Implant, compressive type, diameter 5.0 mm, length 10 mm, multiunite, material: Ti6Al4V. ROOTT M implant with regular multi-unit type abutment is designed just for screw-retained prostheses; It has a compression thread, just like the other Compressive implants. Divergence or convergence up to 60˚ is possible between these types of implants because the slope of the abutment is 30˚. Implant abutment is unique because it has 2,5mm ø fixation screw such dimensions of the screw gives big mechanical resistance comparing to regular 1.6-1.8mm ø fixation screw that can be found in other systems. It can be used not only for full arc fixed dental prostheses. The implant’s abutment is similar to M abutment or ROOTT P implant’s abutment. It can be used in combination with ROOTT P, ROOTT S and ROOTT R implants with multi-unit abutments and allows flap and flapless placement. Advantages of ROOTT M: Simple placement Rich variety of prosthetic solutions Cement free Immediate loading Excellent primary stability in all types of bone Resistant to higher loads in comparing with ROOTT S ROOTT M implant packaging Each implant is delivered in a sterile package with a multifunctional carrier, a two-component holder and labels for clinical records. Content of each box: Sterile blister with ROOTT M implant Multifunction carrier with fixing screw Two-component holder Labels for clinical records 3,300.00 EGP 3300.0 EGP
ROOTT M One-Piece Dental Implant diameter 4 mm,length 12 mm ROOTT Dental Implant, compressive type, diameter 4.0 mm, length 12 mm, multiunite, material: Ti6Al4V. ROOTT M implant with regular multi-unit type abutment is designed just for screw-retained prostheses; It has a compression thread, just like the other Compressive implants. Divergence or convergence up to 60˚ is possible between these types of implants because the slope of the abutment is 30˚. Implant abutment is unique because it has 2,5mm ø fixation screw such dimensions of the screw gives big mechanical resistance comparing to regular 1.6-1.8mm ø fixation screw that can be found in other systems. It can be used not only for full arc fixed dental prostheses. The implant’s abutment is similar to M abutment or ROOTT P implant’s abutment. It can be used in combination with ROOTT P, ROOTT S and ROOTT R implants with multi-unit abutments and allows flap and flapless placement. Advantages of Compressive M: Simple placement Rich variety of prosthetic solutions Cement free Immediate loading Excellent primary stability in all types of bone Resistant to higher loads in comparing with Compressive MS Compressive M implant packaging Each implant is delivered in a sterile package with a multifunctional carrier, a two-component holder and labels for clinical records. Content of each box: Sterile blister with Compressive M implant Multifunction carrier with fixing screw Two-component holder Labels for clinical records 3,300.00 EGP 3300.0 EGP	ROOTT M One-Piece Dental Implant diameter 4 mm,length 10 mm ROOTT Dental Implant, compressive type, diameter 4.0 mm, length 10 mm, multiunite, material: Ti6Al4V. ROOTT M implant with regular multi-unit type abutment is designed just for screw-retained prostheses; It has a compression thread, just like the other Compressive implants. Divergence or convergence up to 60˚ is possible between these types of implants because the slope of the abutment is 30˚. Implant abutment is unique because it has 2,5mm ø fixation screw such dimensions of the screw gives big mechanical resistance comparing to regular 1.6-1.8mm ø fixation screw that can be found in other systems. It can be used not only for full arc fixed dental prostheses. The implant’s abutment is similar to M abutment or ROOTT P implant’s abutment. It can be used in combination with ROOTT P, ROOTT S and ROOTT R implants with multi-unit abutments and allows flap and flapless placement. Advantages of ROOTT M: Simple placement Rich variety of prosthetic solutions Cement free Immediate loading Excellent primary stability in all types of bone Resistant to higher loads in comparing with ROOTT S ROOTT M implant packaging Each implant is delivered in a sterile package with a multifunctional carrier, a two-component holder and labels for clinical records. Content of each box: Sterile blister with ROOTT M implant Multifunction carrier with fixing screw Two-component holder Labels for clinical records 3,300.00 EGP 3300.0 EGP	ROOTT M One-Piece Dental Implant diameter 3.5 mm,length 12 mm ROOTT Dental Implant, compressive type, diameter 3.5 mm, length 12 mm, multiunite, material: Ti6Al4V. ROOTT M implant with regular multi-unit type abutment is designed just for screw-retained prostheses; It has a compression thread, just like the other Compressive implants. Divergence or convergence up to 60˚ is possible between these types of implants because the slope of the abutment is 30˚. Implant abutment is unique because it has 2,5mm ø fixation screw such dimensions of the screw gives big mechanical resistance comparing to regular 1.6-1.8mm ø fixation screw that can be found in other systems. It can be used not only for full arc fixed dental prostheses. The implant’s abutment is similar to M abutment or ROOTT P implant’s abutment. It can be used in combination with ROOTT P, ROOTT S and ROOTT R implants with multi-unit abutments and allows flap and flapless placement. Advantages of ROOTT M: Simple placement Rich variety of prosthetic solutions Cement free Immediate loading Excellent primary stability in all types of bone Resistant to higher loads in comparing with ROOTT S ROOTT M implant packaging Each implant is delivered in a sterile package with a multifunctional carrier, a two-component holder and labels for clinical records. Content of each box: Sterile blister with ROOTT M implant Multifunction carrier with fixing screw Two-component holder Labels for clinical records 3,300.00 EGP 3300.0 EGP	ROOTT M One-Piece Dental Implant diameter 3 mm,length 10 mm ROOTT Dental Implant, compressive type, diameter 3.0 mm, length 10 mm, multiunite, material: Ti6Al4V. ROOTT M implant with regular multi-unit type abutment is designed just for screw-retained prostheses; It has a compression thread, just like the other Compressive implants. Divergence or convergence up to 60˚ is possible between these types of implants because the slope of the abutment is 30˚. Implant abutment is unique because it has 2,5mm ø fixation screw such dimensions of the screw gives big mechanical resistance comparing to regular 1.6-1.8mm ø fixation screw that can be found in other systems. It can be used not only for full arc fixed dental prostheses. The implant’s abutment is similar to M abutment or ROOTT P implant’s abutment. It can be used in combination with ROOTT P, ROOTT S and ROOTT R implants with multi-unit abutments and allows flap and flapless placement. Advantages of ROOTT M: Simple placement Rich variety of prosthetic solutions Cement free Immediate loading Excellent primary stability in all types of bone Resistant to higher loads in comparing with ROOTT S ROOTT M implant packaging Each implant is delivered in a sterile package with a multifunctional carrier, a two-component holder and labels for clinical records. Content of each box: Sterile blister with ROOTT M implant Multifunction carrier with fixing screw Two-component holder Labels for clinical records 3,300.00 EGP 3300.0 EGP
Transfer For Multiunite, Open Tray TOM SKU: tom Categories: Open tray, Open tray, TOM Transfer for multiunite, open tray, material: Ti6Al4V. 650.00 EGP 650.0 EGP	Transfer For Multiunite, Close Tray TRM Transfer for multi-unite, close tray, material: Ti6Al4V. 1,250.00 EGP 1250.0 EGP	ROOTT M One-Piece Dental Implant diameter 3.5 mm,length 10 mm ROOTT Dental Implant, compressive type, diameter 3.5 mm, length 10 mm, multiunite, material: Ti6Al4V. ROOTT M implant with regular multi-unit type abutment is designed just for screw-retained prostheses; It has a compression thread, just like the other Compressive implants. Divergence or convergence up to 60˚ is possible between these types of implants because the slope of the abutment is 30˚. Implant abutment is unique because it has 2,5mm ø fixation screw such dimensions of the screw gives big mechanical resistance comparing to regular 1.6-1.8mm ø fixation screw that can be found in other systems. It can be used not only for full arc fixed dental prostheses. The implant’s abutment is similar to M abutment or ROOTT P implant’s abutment. It can be used in combination with ROOTT P, ROOTT S and ROOTT R implants with multi-unit abutments and allows flap and flapless placement. Advantages of ROOTT M: Simple placement Rich variety of prosthetic solutions Cement free Immediate loading Excellent primary stability in all types of bone Resistant to higher loads in comparing with ROOTT S ROOTT M implant packaging Each implant is delivered in a sterile package with a multifunctional carrier, a two-component holder and labels for clinical records. Content of each box: Sterile blister with ROOTT M implant Multifunction carrier with fixing screw Two-component holder Labels for clinical records 3,300.00 EGP 3300.0 EGP	ROOTT M One-Piece Dental Implant diameter 3.5 mm,length 8 mm ROOTT Dental Implant, compressive type, diameter 3.5 mm, length 8 mm, multiunite, material: Ti6Al4V. ROOTT M implant with regular multi-unit type abutment is designed just for screw-retained prostheses; It has a compression thread, just like the other Compressive implants. Divergence or convergence up to 60˚ is possible between these types of implants because the slope of the abutment is 30˚. Implant abutment is unique because it has 2,5mm ø fixation screw such dimensions of the screw gives big mechanical resistance comparing to regular 1.6-1.8mm ø fixation screw that can be found in other systems. It can be used not only for full arc fixed dental prostheses. The implant’s abutment is similar to M abutment or ROOTT P implant’s abutment. It can be used in combination with ROOTT P, ROOTT S and ROOTT R implants with multi-unit abutments and allows flap and flapless placement. Advantages of ROOTT M: Simple placement Rich variety of prosthetic solutions Cement free Immediate loading Excellent primary stability in all types of bone Resistant to higher loads in comparing with ROOTT S ROOTT M implant packaging Each implant is delivered in a sterile package with a multifunctional carrier, a two-component holder and labels for clinical records. Content of each box: Sterile blister with ROOTT M implant Multifunction carrier with fixing screw Two-component holder Labels for clinical records 3,300.00 EGP 3300.0 EGP
ROOTT M One-Piece Dental Implant diameter 3 mm,length 12 mm ROOTT Dental Implant, compressive type, diameter 3.0 mm, length 12 mm, multiunite, material: Ti6Al4V. ROOTT M implant with regular multi-unit type abutment is designed just for screw-retained prostheses; It has a compression thread, just like the other Compressive implants. Divergence or convergence up to 60˚ is possible between these types of implants because the slope of the abutment is 30˚. Implant abutment is unique because it has 2,5mm ø fixation screw such dimensions of the screw gives big mechanical resistance comparing to regular 1.6-1.8mm ø fixation screw that can be found in other systems. It can be used not only for full arc fixed dental prostheses. The implant’s abutment is similar to M abutment or ROOTT P implant’s abutment. It can be used in combination with ROOTT P, ROOTT S and ROOTT R implants with multi-unit abutments and allows flap and flapless placement. Advantages of ROOTT M: Simple placement Rich variety of prosthetic solutions Cement free Immediate loading Excellent primary stability in all types of bone Resistant to higher loads in comparing with ROOTT S ROOTT M implant packaging Each implant is delivered in a sterile package with a multifunctional carrier, a two-component holder and labels for clinical records. Content of each box: Sterile blister with ROOTT M implant Multifunction carrier with fixing screw Two-component holder Labels for clinical records 3,300.00 EGP 3300.0 EGP	Scan Post For Multiunite SPCOMIO SKU: spcomio Categories: Scan-post, Scan-post Scan post for multiunite, laboratory, material: Ti6Al4V. 1,250.00 EGP 1250.0 EGP	Scan Post For Multiunite SPCOM SKU: spcom Categories: Scan-post, Scan-post Scan post for multiunite, laboratory, material: Ti6Al4V. 1,250.00 EGP 1250.0 EGP	Platform for Regular multiunite.PCOM SKU: pcom Categories: PCOM, Platform, Platform Platform for multiunite. open CAD-CAM. without hex. material : Ti6Al4V 1,250.00 EGP 1250.0 EGP
Healing Abutment For Multiunite,Height 6 mm GFM6 SKU: gfm6 Categories: Regular, Regular Healing abutment for multiunite, height 6 mm, material: Ti6Al4V. 650.00 EGP 650.0 EGP	Healing Abutment For Multiunite,Height 4 mm GFM4 SKU: gfm4 Categories: Regular, Regular Healing abutment for multiunite, height 4 mm, material: Ti6Al4V. 650.00 EGP 650.0 EGP	Healing Abutment For Multiunite,Height 2 mm GFM2 SKU: gfm2 Categories: Regular, Regular Healing abutment for multiunite, height 2 mm, material: Ti6Al4V. 650.00 EGP 650.0 EGP	ROOTT M One-Piece Dental Implant diameter 5 mm,length 12 mm ROOTT Dental Implant, compressive type, diameter 5.0 mm, length 12 mm, multiunite, material: Ti6Al4V. ROOTT M implant with regular multi-unit type abutment is designed just for screw-retained prostheses; It has a compression thread, just like the other Compressive implants. Divergence or convergence up to 60˚ is possible between these types of implants because the slope of the abutment is 30˚. Implant abutment is unique because it has 2,5mm ø fixation screw such dimensions of the screw gives big mechanical resistance comparing to regular 1.6-1.8mm ø fixation screw that can be found in other systems. It can be used not only for full arc fixed dental prostheses. The implant’s abutment is similar to M abutment or ROOTT P implant’s abutment. It can be used in combination with ROOTT P, ROOTT S and ROOTT R implants with multi-unit abutments and allows flap and flapless placement. Advantages of ROOTT M: Simple placement Rich variety of prosthetic solutions Cement free Immediate loading Excellent primary stability in all types of bone Resistant to higher loads in comparing with ROOTT S ROOTT M implant packaging Each implant is delivered in a sterile package with a multifunctional carrier, a two-component holder and labels for clinical records. Content of each box: Sterile blister with ROOTT M implant Multifunction carrier with fixing screw Two-component holder Labels for clinical records 3,300.00 EGP 3300.0 EGP
ROOTT M One-Piece Dental Implant diameter 3 mm,length 8 mm ROOTT Dental Implant, compressive type, diameter 3.0 mm, length 8 mm, multiunite, material: Ti6Al4V. ROOTT M implant with regular multi-unit type abutment is designed just for screw-retained prostheses; It has a compression thread, just like the other Compressive implants. Divergence or convergence up to 60˚ is possible between these types of implants because the slope of the abutment is 30˚. Implant abutment is unique because it has 2,5mm ø fixation screw such dimensions of the screw gives big mechanical resistance comparing to regular 1.6-1.8mm ø fixation screw that can be found in other systems. It can be used not only for full arc fixed dental prostheses. The implant’s abutment is similar to M abutment or ROOTT P implant’s abutment. It can be used in combination with ROOTT P, ROOTT S and ROOTT R implants with multi-unit abutments and allows flap and flapless placement. Advantages of ROOTT M: Simple placement Rich variety of prosthetic solutions Cement free Immediate loading Excellent primary stability in all types of bone Resistant to higher loads in comparing with ROOTT S ROOTT M implant packaging Each implant is delivered in a sterile package with a multifunctional carrier, a two-component holder and labels for clinical records. Content of each box: Sterile blister with ROOTT M implant Multifunction carrier with fixing screw Two-component holder Labels for clinical records 3,300.00 EGP 3300.0 EGP	Analog Of Multiunite ANMD Analog. material : SS 650.00 EGP 650.0 EGP	Abutment For Multiunite AM SKU: am Categories: Straight, Straight Abutment for multiunite, material: Ti6Al4V. 1,250.00 EGP 1250.0 EGP	Burn out Abutment For Multiunite,Angled ABMUA Burn out abutment for multiunite, angled, material: POM-C. 1,250.00 EGP 1250.0 EGP
Burn out Abutment For Multiunite.Without Hex. ABMU Burn out abutment for multiunite. without hex. material : POM-C 1,250.00 EGP 1250.0 EGP	Healing Abutment For Multiunite,Height 0 mm GFM0 SKU: gfm0 Categories: Regular, Regular Healing abutment for multiunite, height 0 mm, material: Ti6Al4V. 650.00 EGP 650.0 EGP