ROOTT Dental Implant. compressive type. diameter 5.0 mm. length 14 mm. material Ti6Al4V

ROOTT C implant is a one-piece compressive type implant that is specially designed to provide perfect primary stability and is used in clinical situations when horizontal alveolar ridge atrophy is observed.

It can be used in combination with basal implants and allows flap and flapless placement.

It has a unique feature to be bent. This feature makes the prosthetic treatment easier.

The length of the neck is 3 mm.

Divergence or convergence up to 10˚ is possible between this type of implants because the slope of the abutment is 5˚.

If the divergence or convergence between this type of implants is found more than 5˚ then the abutment can be grinded.

The abutment is designed for cemented or conometric (telescopic) type of fixation as well.

Can be used with caution to create single restorations in situations where high primary stability is achieved on placement.

Bendable neck

Depending on the length of the implant the abutment can be bent up to 15 degrees, as long as the implant is placed with high primary stability.

ROOTT Dental Implant. compressive type. diameter 5.5 mm. length 6 mm. material Ti6Al4V

ROOTT C implant is a one-piece compressive type implant that is specially designed to provide perfect primary stability and is used in clinical situations when horizontal alveolar ridge atrophy is observed.

It can be used in combination with basal implants and allows flap and flapless placement.

It has a unique feature to be bent. This feature makes the prosthetic treatment easier.

The length of the neck is 3 mm.

Divergence or convergence up to 10˚ is possible between this type of implants because the slope of the abutment is 5˚.

If the divergence or convergence between this type of implants is found more than 5˚ then the abutment can be grinded.

The abutment is designed for cemented or conometric (telescopic) type of fixation as well.

Can be used with caution to create single restorations in situations where high primary stability is achieved on placement.

Bendable neck

Depending on the length of the implant the abutment can be bent up to 15 degrees, as long as the implant is placed with high primary stability.

ROOTT Dental Implant. compressive type. diameter 4.5 mm. length 20 mm. material Ti6Al4V

ROOTT C implant is a one-piece compressive type implant that is specially designed to provide perfect primary stability and is used in clinical situations when horizontal alveolar ridge atrophy is observed.

It can be used in combination with basal implants and allows flap and flapless placement.

It has a unique feature to be bent. This feature makes the prosthetic treatment easier.

The length of the neck is 3 mm.

Divergence or convergence up to 10˚ is possible between this type of implants because the slope of the abutment is 5˚.

If the divergence or convergence between this type of implants is found more than 5˚ then the abutment can be grinded.

The abutment is designed for cemented or conometric (telescopic) type of fixation as well.

Can be used with caution to create single restorations in situations where high primary stability is achieved on placement.

Bendable neck

Depending on the length of the implant the abutment can be bent up to 15 degrees, as long as the implant is placed with high primary stability.

ROOTT Dental Implant. compressive type. diameter 4.5 mm. length 18 mm. material Ti6Al4V

ROOTT C implant is a one-piece compressive type implant that is specially designed to provide perfect primary stability and is used in clinical situations when horizontal alveolar ridge atrophy is observed.

It can be used in combination with basal implants and allows flap and flapless placement.

It has a unique feature to be bent. This feature makes the prosthetic treatment easier.

The length of the neck is 3 mm.

Divergence or convergence up to 10˚ is possible between this type of implants because the slope of the abutment is 5˚.

If the divergence or convergence between this type of implants is found more than 5˚ then the abutment can be grinded.

The abutment is designed for cemented or conometric (telescopic) type of fixation as well.

Can be used with caution to create single restorations in situations where high primary stability is achieved on placement.

Bendable neck

Depending on the length of the implant the abutment can be bent up to 15 degrees, as long as the implant is placed with high primary stability.

ROOTT Dental Implant. compressive type. diameter 4.5 mm. length 16 mm. material Ti6Al4V

ROOTT C implant is a one-piece compressive type implant that is specially designed to provide perfect primary stability and is used in clinical situations when horizontal alveolar ridge atrophy is observed.

It can be used in combination with basal implants and allows flap and flapless placement.

It has a unique feature to be bent. This feature makes the prosthetic treatment easier.

The length of the neck is 3 mm.

Divergence or convergence up to 10˚ is possible between this type of implants because the slope of the abutment is 5˚.

If the divergence or convergence between this type of implants is found more than 5˚ then the abutment can be grinded.

The abutment is designed for cemented or conometric (telescopic) type of fixation as well.

Can be used with caution to create single restorations in situations where high primary stability is achieved on placement.

Bendable neck

Depending on the length of the implant the abutment can be bent up to 15 degrees, as long as the implant is placed with high primary stability.

ROOTT Dental Implant, compressive type, diameter 4.5 mm, length 10 mm, short neck, material: Ti6Al4V.

ROOTT CS implant is one piece compressive type implant with short 1.5 mm neck.

Is used in clinical situations when limited distance to some anatomical elements (e.g.: n.alv. inferior) is found.

Not bendable!

Divergence or convergence up to 10 ˚ is possible between this type of implants because the slope of abutment is 5˚.

If the divergence or convergence between this type of implants is found more than 5˚ then the abutment can be grinded.

The abutment is designed for cemented or conometric(telescopic) type of fixation as well.

Advantages:

Simple placement and prosthetic procedure
Immediate loading
Excellent primary stability in all types of bone
Adjustable abutment slope angle
Resistant to cervical fractures
Short neck
ROOTT CS implant packaging

Each implant is delivered in a sterile package with a two-component holder and labels for clinical records.

Content of each box:

Sterile blister with ROOTT CS implant
Two-component holder
Labels for clinical records

ROOTT Dental Implant, compressive type, diameter 4.5 mm, length 8 mm, short neck, material: Ti6Al4V.

ROOTT CS implant is one piece compressive type implant with short 1.5 mm neck.

Is used in clinical situations when limited distance to some anatomical elements (e.g.: n.alv. inferior) is found.

Not bendable!

Divergence or convergence up to 10 ˚ is possible between this type of implants because the slope of abutment is 5˚.

If the divergence or convergence between this type of implants is found more than 5˚ then the abutment can be grinded.

The abutment is designed for cemented or conometric(telescopic) type of fixation as well.

Advantages:

Simple placement and prosthetic procedure
Immediate loading
Excellent primary stability in all types of bone
Adjustable abutment slope angle
Resistant to cervical fractures
Short neck
ROOTT CS implant packaging

Each implant is delivered in a sterile package with a two-component holder and labels for clinical records.

Content of each box:

Sterile blister with ROOTT CS implant
Two-component holder
Labels for clinical records

ROOTT Dental Implant. compressive type. diameter 4.5 mm. length 8 mm. material Ti6Al4V

ROOTT C implant is a one-piece compressive type implant that is specially designed to provide perfect primary stability and is used in clinical situations when horizontal alveolar ridge atrophy is observed.

It can be used in combination with basal implants and allows flap and flapless placement.

It has a unique feature to be bent. This feature makes the prosthetic treatment easier.

The length of the neck is 3 mm.

Divergence or convergence up to 10˚ is possible between this type of implants because the slope of the abutment is 5˚.

If the divergence or convergence between this type of implants is found more than 5˚ then the abutment can be grinded.

The abutment is designed for cemented or conometric (telescopic) type of fixation as well.

Can be used with caution to create single restorations in situations where high primary stability is achieved on placement.

Bendable neck

Depending on the length of the implant the abutment can be bent up to 15 degrees, as long as the implant is placed with high primary stability.

ROOTT Dental Implant, basal ss type, diameter 3.5 mm, length 16 mm, material: Ti6Al4V.

ROOTT BS dental implant is a sandblasted version of the ROOTT B one-piece implant with a prolonged 1.5-7mm neck. Recommended in clinical situations when high (until 7mm) horizontally atrophied alveolar ridge is observed.

It has a unique feature to be bent. This feature makes the prosthetic treatment easier.

Implants with necks less than 3mm are not bendable.

Divergence or convergence up to 10˚ is possible between these types of implants because the slope of the abutment is 5˚.

If the divergence or convergence of more than 5˚ between these types of implants is found the abutment can be grinded.

The abutment is designed for cemented or conometric (telescopic) type of fixation as well.

The structural characteristics allow placement in bone that is deficient in height and width. They can be placed with flap or flapless technique.

ROOTT BS can be used to bypass the mandibular nerve and for the engagement of the cortical bone at the fusion of the pterygoid with the maxilla. Can be used in combination with Compressive implants.

Can be bent up to 15° after implant placement

Advantages:

Ideal for resorbed ridges
Immediate loading
Placement in a socket of an extracted tooth
Excellent protection from inflammation around the dental implant
Adjustment of abutment angle 15 degrees
Sandblasted

ROOTT Dental Implant. compressive type. diameter 4.5 mm. length 6 mm. material Ti6Al4V

ROOTT C implant is a one-piece compressive type implant that is specially designed to provide perfect primary stability and is used in clinical situations when horizontal alveolar ridge atrophy is observed.

It can be used in combination with basal implants and allows flap and flapless placement.

It has a unique feature to be bent. This feature makes the prosthetic treatment easier.

The length of the neck is 3 mm.

Divergence or convergence up to 10˚ is possible between this type of implants because the slope of the abutment is 5˚.

If the divergence or convergence between this type of implants is found more than 5˚ then the abutment can be grinded.

The abutment is designed for cemented or conometric (telescopic) type of fixation as well.

Can be used with caution to create single restorations in situations where high primary stability is achieved on placement.

Bendable neck

Depending on the length of the implant the abutment can be bent up to 15 degrees, as long as the implant is placed with high primary stability.

ROOTT Dental Implant. compressive type. diameter 4.0 mm. length 20 mm. material Ti6Al4V

ROOTT C implant is a one-piece compressive type implant that is specially designed to provide perfect primary stability and is used in clinical situations when horizontal alveolar ridge atrophy is observed.

It can be used in combination with basal implants and allows flap and flapless placement.

It has a unique feature to be bent. This feature makes the prosthetic treatment easier.

The length of the neck is 3 mm.

Divergence or convergence up to 10˚ is possible between this type of implants because the slope of the abutment is 5˚.

If the divergence or convergence between this type of implants is found more than 5˚ then the abutment can be grinded.

The abutment is designed for cemented or conometric (telescopic) type of fixation as well.

Can be used with caution to create single restorations in situations where high primary stability is achieved on placement.

Bendable neck

Depending on the length of the implant the abutment can be bent up to 15 degrees, as long as the implant is placed with high primary stability.

ROOTT Dental Implant. compressive type. diameter 4.0 mm. length 18 mm. material Ti6Al4V

ROOTT C implant is a one-piece compressive type implant that is specially designed to provide perfect primary stability and is used in clinical situations when horizontal alveolar ridge atrophy is observed.

It can be used in combination with basal implants and allows flap and flapless placement.

It has a unique feature to be bent. This feature makes the prosthetic treatment easier.

The length of the neck is 3 mm.

Divergence or convergence up to 10˚ is possible between this type of implants because the slope of the abutment is 5˚.

If the divergence or convergence between this type of implants is found more than 5˚ then the abutment can be grinded.

The abutment is designed for cemented or conometric (telescopic) type of fixation as well.

Can be used with caution to create single restorations in situations where high primary stability is achieved on placement.

Bendable neck

Depending on the length of the implant the abutment can be bent up to 15 degrees, as long as the implant is placed with high primary stability.

ROOTT Dental Implant. compressive type. diameter 4.0 mm. length 16 mm. material Ti6Al4V

ROOTT C implant is a one-piece compressive type implant that is specially designed to provide perfect primary stability and is used in clinical situations when horizontal alveolar ridge atrophy is observed.

It can be used in combination with basal implants and allows flap and flapless placement.

It has a unique feature to be bent. This feature makes the prosthetic treatment easier.

The length of the neck is 3 mm.

Divergence or convergence up to 10˚ is possible between this type of implants because the slope of the abutment is 5˚.

If the divergence or convergence between this type of implants is found more than 5˚ then the abutment can be grinded.

The abutment is designed for cemented or conometric (telescopic) type of fixation as well.

Can be used with caution to create single restorations in situations where high primary stability is achieved on placement.

Bendable neck

Depending on the length of the implant the abutment can be bent up to 15 degrees, as long as the implant is placed with high primary stability.

ROOTT Dental Implant. compressive type. diameter 4.0 mm. length 14 mm. material Ti6Al4V

ROOTT C implant is a one-piece compressive type implant that is specially designed to provide perfect primary stability and is used in clinical situations when horizontal alveolar ridge atrophy is observed.

It can be used in combination with basal implants and allows flap and flapless placement.

It has a unique feature to be bent. This feature makes the prosthetic treatment easier.

The length of the neck is 3 mm.

Divergence or convergence up to 10˚ is possible between this type of implants because the slope of the abutment is 5˚.

If the divergence or convergence between this type of implants is found more than 5˚ then the abutment can be grinded.

The abutment is designed for cemented or conometric (telescopic) type of fixation as well.

Can be used with caution to create single restorations in situations where high primary stability is achieved on placement.

Bendable neck

Depending on the length of the implant the abutment can be bent up to 15 degrees, as long as the implant is placed with high primary stability.

ROOTT Dental Implant. compressive type. diameter 4.0 mm. length 12 mm. material Ti6Al4V

ROOTT C implant is a one-piece compressive type implant that is specially designed to provide perfect primary stability and is used in clinical situations when horizontal alveolar ridge atrophy is observed.

It can be used in combination with basal implants and allows flap and flapless placement.

It has a unique feature to be bent. This feature makes the prosthetic treatment easier.

The length of the neck is 3 mm.

Divergence or convergence up to 10˚ is possible between this type of implants because the slope of the abutment is 5˚.

If the divergence or convergence between this type of implants is found more than 5˚ then the abutment can be grinded.

The abutment is designed for cemented or conometric (telescopic) type of fixation as well.

Can be used with caution to create single restorations in situations where high primary stability is achieved on placement.

Bendable neck

Depending on the length of the implant the abutment can be bent up to 15 degrees, as long as the implant is placed with high primary stability.

ROOTT Dental Implant, compressive type, diameter 4.0 mm, length 10 mm, short neck, material: Ti6Al4V.

ROOTT CS implant is one piece compressive type implant with short 1.5 mm neck.

Is used in clinical situations when limited distance to some anatomical elements (e.g.: n.alv. inferior) is found.

Not bendable!

Divergence or convergence up to 10 ˚ is possible between this type of implants because the slope of abutment is 5˚.

If the divergence or convergence between this type of implants is found more than 5˚ then the abutment can be grinded.

The abutment is designed for cemented or conometric(telescopic) type of fixation as well.

Advantages:

Simple placement and prosthetic procedure
Immediate loading
Excellent primary stability in all types of bone
Adjustable abutment slope angle
Resistant to cervical fractures
Short neck
ROOTT CS implant packaging

Each implant is delivered in a sterile package with a two-component holder and labels for clinical records.

Content of each box:

Sterile blister with ROOTT CS implant
Two-component holder
Labels for clinical records

ROOTT Dental Implant, compressive type, diameter 4.0 mm, length 8 mm, short neck, material: Ti6Al4V.

ROOTT CS implant is one piece compressive type implant with short 1.5 mm neck.

Is used in clinical situations when limited distance to some anatomical elements (e.g.: n.alv. inferior) is found.

Not bendable!

Divergence or convergence up to 10 ˚ is possible between this type of implants because the slope of abutment is 5˚.

If the divergence or convergence between this type of implants is found more than 5˚ then the abutment can be grinded.

The abutment is designed for cemented or conometric(telescopic) type of fixation as well.

Advantages:

Simple placement and prosthetic procedure
Immediate loading
Excellent primary stability in all types of bone
Adjustable abutment slope angle
Resistant to cervical fractures
Short neck
ROOTT CS implant packaging

Each implant is delivered in a sterile package with a two-component holder and labels for clinical records.

Content of each box:

Sterile blister with ROOTT CS implant
Two-component holder
Labels for clinical records

ROOTT Dental Implant, compressive type, diameter 4.0 mm, length 6 mm, short neck, material: Ti6Al4V.

ROOTT CS implant is one piece compressive type implant with short 1.5 mm neck.

Is used in clinical situations when limited distance to some anatomical elements (e.g.: n.alv. inferior) is found.

Not bendable!

Divergence or convergence up to 10 ˚ is possible between this type of implants because the slope of abutment is 5˚.

If the divergence or convergence between this type of implants is found more than 5˚ then the abutment can be grinded.

The abutment is designed for cemented or conometric(telescopic) type of fixation as well.

Advantages:

Simple placement and prosthetic procedure
Immediate loading
Excellent primary stability in all types of bone
Adjustable abutment slope angle
Resistant to cervical fractures
Short neck
ROOTT CS implant packaging

Each implant is delivered in a sterile package with a two-component holder and labels for clinical records.

Content of each box:

Sterile blister with ROOTT CS implant
Two-component holder
Labels for clinical records

ROOTT Dental Implant. compressive type. diameter 3.5 mm. length 20 mm. material Ti6Al4V

ROOTT C implant is a one-piece compressive type implant that is specially designed to provide perfect primary stability and is used in clinical situations when horizontal alveolar ridge atrophy is observed.

It can be used in combination with basal implants and allows flap and flapless placement.

It has a unique feature to be bent. This feature makes the prosthetic treatment easier.

The length of the neck is 3 mm.

Divergence or convergence up to 10˚ is possible between this type of implants because the slope of the abutment is 5˚.

If the divergence or convergence between this type of implants is found more than 5˚ then the abutment can be grinded.

The abutment is designed for cemented or conometric (telescopic) type of fixation as well.

Can be used with caution to create single restorations in situations where high primary stability is achieved on placement.

Bendable neck

Depending on the length of the implant the abutment can be bent up to 15 degrees, as long as the implant is placed with high primary stability.

ROOTT Dental Implant. compressive type. diameter 3.5 mm. length 18 mm. material Ti6Al4V

ROOTT C implant is a one-piece compressive type implant that is specially designed to provide perfect primary stability and is used in clinical situations when horizontal alveolar ridge atrophy is observed.

It can be used in combination with basal implants and allows flap and flapless placement.

It has a unique feature to be bent. This feature makes the prosthetic treatment easier.

The length of the neck is 3 mm.

Divergence or convergence up to 10˚ is possible between this type of implants because the slope of the abutment is 5˚.

If the divergence or convergence between this type of implants is found more than 5˚ then the abutment can be grinded.

The abutment is designed for cemented or conometric (telescopic) type of fixation as well.

Can be used with caution to create single restorations in situations where high primary stability is achieved on placement.

Bendable neck

Depending on the length of the implant the abutment can be bent up to 15 degrees, as long as the implant is placed with high primary stability.

ROOTT Dental Implant. compressive type. diameter 3.5 mm. length 16 mm. material Ti6Al4V

ROOTT C implant is a one-piece compressive type implant that is specially designed to provide perfect primary stability and is used in clinical situations when horizontal alveolar ridge atrophy is observed.

It can be used in combination with basal implants and allows flap and flapless placement.

It has a unique feature to be bent. This feature makes the prosthetic treatment easier.

The length of the neck is 3 mm.

Divergence or convergence up to 10˚ is possible between this type of implants because the slope of the abutment is 5˚.

If the divergence or convergence between this type of implants is found more than 5˚ then the abutment can be grinded.

The abutment is designed for cemented or conometric (telescopic) type of fixation as well.

Can be used with caution to create single restorations in situations where high primary stability is achieved on placement.

Bendable neck

Depending on the length of the implant the abutment can be bent up to 15 degrees, as long as the implant is placed with high primary stability.

ROOTT Dental Implant. compressive type. diameter 3.5 mm. length 6 mm.

ROOTT C implant is a one-piece compressive type implant that is specially designed to provide perfect primary stability and is used in clinical situations when horizontal alveolar ridge atrophy is observed.

It can be used in combination with basal implants and allows flap and flapless placement.

It has a unique feature to be bent. This feature makes the prosthetic treatment easier.

The length of the neck is 3 mm.

Divergence or convergence up to 10˚ is possible between this type of implants because the slope of the abutment is 5˚.

If the divergence or convergence between this type of implants is found more than 5˚ then the abutment can be grinded.

The abutment is designed for cemented or conometric (telescopic) type of fixation as well.

Can be used with caution to create single restorations in situations where high primary stability is achieved on placement.

Bendable neck

Depending on the length of the implant the abutment can be bent up to 15 degrees, as long as the implant is placed with high primary stability.

ROOTT Dental Implant, compressive type, diameter 3.0 mm, length 20 mm

ROOTT C implant is a one-piece compressive type implant that is specially designed to provide perfect primary stability and is used in clinical situations when horizontal alveolar ridge atrophy is observed.

It can be used in combination with basal implants and allows flap and flapless placement.

It has a unique feature to be bent. This feature makes the prosthetic treatment easier.

The length of the neck is 3 mm.

Divergence or convergence up to 10˚ is possible between this type of implants because the slope of the abutment is 5˚.

If the divergence or convergence between this type of implants is found more than 5˚ then the abutment can be grinded.

The abutment is designed for cemented or conometric (telescopic) type of fixation as well.

Can be used with caution to create single restorations in situations where high primary stability is achieved on placement.

Bendable neck

Depending on the length of the implant the abutment can be bent up to 15 degrees, as long as the implant is placed with high primary stability.

ROOTT Dental Implant, compressive type, diameter 3.0 mm, length 18 mm.

ROOTT C implant is a one-piece compressive type implant that is specially designed to provide perfect primary stability and is used in clinical situations when horizontal alveolar ridge atrophy is observed.

It can be used in combination with basal implants and allows flap and flapless placement.

It has a unique feature to be bent. This feature makes the prosthetic treatment easier.

The length of the neck is 3 mm.

Divergence or convergence up to 10˚ is possible between this type of implants because the slope of the abutment is 5˚.

If the divergence or convergence between this type of implants is found more than 5˚ then the abutment can be grinded.

The abutment is designed for cemented or conometric (telescopic) type of fixation as well.

Can be used with caution to create single restorations in situations where high primary stability is achieved on placement.

Bendable neck

Depending on the length of the implant the abutment can be bent up to 15 degrees, as long as the implant is placed with high primary stability.

ROOTT Dental Implant. compressive type. diameter 3.0 mm. length 8 mm. material Ti6Al4V

ROOTT C implant is a one-piece compressive type implant that is specially designed to provide perfect primary stability and is used in clinical situations when horizontal alveolar ridge atrophy is observed.

It can be used in combination with basal implants and allows flap and flapless placement.

It has a unique feature to be bent. This feature makes the prosthetic treatment easier.

The length of the neck is 3 mm.

Divergence or convergence up to 10˚ is possible between this type of implants because the slope of the abutment is 5˚.

If the divergence or convergence between this type of implants is found more than 5˚ then the abutment can be grinded.

The abutment is designed for cemented or conometric (telescopic) type of fixation as well.

Can be used with caution to create single restorations in situations where high primary stability is achieved on placement.

Bendable neck

Depending on the length of the implant the abutment can be bent up to 15 degrees, as long as the implant is placed with high primary stability.

ROOTT Dental Implant, compressive type, diameter 3.0 mm, length 6 mm.

ROOTT C implant is a one-piece compressive type implant that is specially designed to provide perfect primary stability and is used in clinical situations when horizontal alveolar ridge atrophy is observed.

It can be used in combination with basal implants and allows flap and flapless placement.

It has a unique feature to be bent. This feature makes the prosthetic treatment easier.

The length of the neck is 3 mm.

Divergence or convergence up to 10˚ is possible between this type of implants because the slope of the abutment is 5˚.

If the divergence or convergence between this type of implants is found more than 5˚ then the abutment can be grinded.

The abutment is designed for cemented or conometric (telescopic) type of fixation as well.

Can be used with caution to create single restorations in situations where high primary stability is achieved on placement.

Bendable neck

Depending on the length of the implant the abutment can be bent up to 15 degrees, as long as the implant is placed with high primary stability.

ROOTT Dental Implant, basal ss type, diameter 3.5 mm, length 26 mm, material: Ti6Al4V.

ROOTT BS dental implant is a sandblasted version of the ROOTT B one-piece implant with a prolonged 1.5-7mm neck. Recommended in clinical situations when high (until 7mm) horizontally atrophied alveolar ridge is observed.

It has a unique feature to be bent. This feature makes the prosthetic treatment easier.

Implants with necks less than 3mm are not bendable.

Divergence or convergence up to 10˚ is possible between these types of implants because the slope of the abutment is 5˚.

If the divergence or convergence of more than 5˚ between these types of implants is found the abutment can be grinded.

The abutment is designed for cemented or conometric (telescopic) type of fixation as well.

The structural characteristics allow placement in bone that is deficient in height and width. They can be placed with flap or flapless technique.

ROOTT BS can be used to bypass the mandibular nerve and for the engagement of the cortical bone at the fusion of the pterygoid with the maxilla. Can be used in combination with Compressive implants.

Can be bent up to 15° after implant placement

Advantages:

Ideal for resorbed ridges
Immediate loading
Placement in a socket of an extracted tooth
Excellent protection from inflammation around the dental implant
Adjustment of abutment angle 15 degrees
Sandblasted

ROOTT Dental Implant, basal ss type, diameter 3.5 mm, length 24 mm, material: Ti6Al4V.

ROOTT BS dental implant is a sandblasted version of the ROOTT B one-piece implant with a prolonged 1.5-7mm neck. Recommended in clinical situations when high (until 7mm) horizontally atrophied alveolar ridge is observed.

It has a unique feature to be bent. This feature makes the prosthetic treatment easier.

Implants with necks less than 3mm are not bendable.

Divergence or convergence up to 10˚ is possible between these types of implants because the slope of the abutment is 5˚.

If the divergence or convergence of more than 5˚ between these types of implants is found the abutment can be grinded.

The abutment is designed for cemented or conometric (telescopic) type of fixation as well.

The structural characteristics allow placement in bone that is deficient in height and width. They can be placed with flap or flapless technique.

ROOTT BS can be used to bypass the mandibular nerve and for the engagement of the cortical bone at the fusion of the pterygoid with the maxilla. Can be used in combination with Compressive implants.

Can be bent up to 15° after implant placement

Advantages:

Ideal for resorbed ridges
Immediate loading
Placement in a socket of an extracted tooth
Excellent protection from inflammation around the dental implant
Adjustment of abutment angle 15 degrees
Sandblasted

ROOTT Dental Implant, basal ss type, diameter 3.5 mm, length 22 mm, material: Ti6Al4V.

ROOTT BS dental implant is a sandblasted version of the ROOTT B one-piece implant with a prolonged 1.5-7mm neck. Recommended in clinical situations when high (until 7mm) horizontally atrophied alveolar ridge is observed.

It has a unique feature to be bent. This feature makes the prosthetic treatment easier.

Implants with necks less than 3mm are not bendable.

Divergence or convergence up to 10˚ is possible between these types of implants because the slope of the abutment is 5˚.

If the divergence or convergence of more than 5˚ between these types of implants is found the abutment can be grinded.

The abutment is designed for cemented or conometric (telescopic) type of fixation as well.

The structural characteristics allow placement in bone that is deficient in height and width. They can be placed with flap or flapless technique.

ROOTT BS can be used to bypass the mandibular nerve and for the engagement of the cortical bone at the fusion of the pterygoid with the maxilla. Can be used in combination with Compressive implants.

Can be bent up to 15° after implant placement

Advantages:

Ideal for resorbed ridges
Immediate loading
Placement in a socket of an extracted tooth
Excellent protection from inflammation around the dental implant
Adjustment of abutment angle 15 degrees
Sandblasted