SKU: d4216
Category: R 4.2
Drill for R4216
4.2 . length . 16 mm

SKU: d4216
Category: R 4.2
Drill for R4216
4.2 . length . 16 mm

SKU: d4214
Category: R 4.2
Drill for R4214

4.2 . length . 14 mm

SKU: d4212
Category: R 4.2
Drill for R4212

4.2 . length . 12 mm

SKU: d4208
Category: R 4.2
Drill for R4208
4.2 . length . 8 mm

SKU: d4216
Category: R 4.2
Drill for R4216
4.2 . length . 16 mm

SKU: d3816
Category: R 3.8
Drill for R3816

3.8 . length . 16 mm

SKU: d3516
Category: R 3.5
Drill for R3516

3.5 . length . 16 mm

SKU: d3510
Category: R 3.5
Drill for R3510

3.5 . length . 10 mm

SKU: d2014
Category: Twist drills
Twist drill, diameter 2.0 mm,
length 14 mm

SKU: d2010
Category: Twist drills
Twist drill, diameter 2.0 mm,
length 10 mm

SKU: d2008
Category: Twist drills
Twist drill, diameter 2.0 mm,
length 8 mm

ROOTT Dental Implant. compressive type. diameter 5.5 mm. length 6 mm. material Ti6Al4V

ROOTT C implant is a one-piece compressive type implant that is specially designed to provide perfect primary stability and is used in clinical situations when horizontal alveolar ridge atrophy is observed.

It can be used in combination with basal implants and allows flap and flapless placement.

It has a unique feature to be bent. This feature makes the prosthetic treatment easier.

The length of the neck is 3 mm.

Divergence or convergence up to 10˚ is possible between this type of implants because the slope of the abutment is 5˚.

If the divergence or convergence between this type of implants is found more than 5˚ then the abutment can be grinded.

The abutment is designed for cemented or conometric (telescopic) type of fixation as well.

Can be used with caution to create single restorations in situations where high primary stability is achieved on placement.

Bendable neck

Depending on the length of the implant the abutment can be bent up to 15 degrees, as long as the implant is placed with high primary stability.

ROOTT Dental Implant, compressive type, diameter 5.0 mm, length 12 mm, multiunite, material: Ti6Al4V.

ROOTT M implant with regular multi-unit type abutment is designed just for screw-retained prostheses;

It has a compression thread, just like the other Compressive implants.

Divergence or convergence up to 60˚ is possible between these types of implants because the slope of the abutment is 30˚.

Implant abutment is unique because it has 2,5mm ø fixation screw such dimensions of the screw gives big mechanical resistance comparing to regular 1.6-1.8mm ø fixation screw that can be found in other systems.

It can be used not only for full arc fixed dental prostheses.

The implant’s abutment is similar to M abutment or ROOTT P implant’s abutment.

It can be used in combination with ROOTT P, ROOTT S and ROOTT R implants with multi-unit abutments and allows flap and flapless placement.

Advantages of ROOTT M:

Simple placement
Rich variety of prosthetic solutions
Cement free
Immediate loading
Excellent primary stability in all types of bone
Resistant to higher loads in comparing with ROOTT S
ROOTT M implant packaging

Each implant is delivered in a sterile package with a multifunctional carrier, a two-component holder and labels for clinical records.

Content of each box:

Sterile blister with ROOTT M implant
Multifunction carrier with fixing screw
Two-component holder
Labels for clinical records

ROOTT Dental Implant. compressive type. diameter 5.0 mm. length 8 mm. material Ti6Al4V

ROOTT C implant is a one-piece compressive type implant that is specially designed to provide perfect primary stability and is used in clinical situations when horizontal alveolar ridge atrophy is observed.

It can be used in combination with basal implants and allows flap and flapless placement.

It has a unique feature to be bent. This feature makes the prosthetic treatment easier.

The length of the neck is 3 mm.

Divergence or convergence up to 10˚ is possible between this type of implants because the slope of the abutment is 5˚.

If the divergence or convergence between this type of implants is found more than 5˚ then the abutment can be grinded.

The abutment is designed for cemented or conometric (telescopic) type of fixation as well.

Can be used with caution to create single restorations in situations where high primary stability is achieved on placement.

Bendable neck

Depending on the length of the implant the abutment can be bent up to 15 degrees, as long as the implant is placed with high primary stability.

ROOTT Dental Implant. compressive type. diameter 4.5 mm. length 10 mm. material Ti6Al4V

ROOTT C implant is a one-piece compressive type implant that is specially designed to provide perfect primary stability and is used in clinical situations when horizontal alveolar ridge atrophy is observed.

It can be used in combination with basal implants and allows flap and flapless placement.

It has a unique feature to be bent. This feature makes the prosthetic treatment easier.

The length of the neck is 3 mm.

Divergence or convergence up to 10˚ is possible between this type of implants because the slope of the abutment is 5˚.

If the divergence or convergence between this type of implants is found more than 5˚ then the abutment can be grinded.

The abutment is designed for cemented or conometric (telescopic) type of fixation as well.

Can be used with caution to create single restorations in situations where high primary stability is achieved on placement.

Bendable neck

Depending on the length of the implant the abutment can be bent up to 15 degrees, as long as the implant is placed with high primary stability.

ROOTT Dental Implant. compressive type. diameter 4.0 mm. length 10 mm. material Ti6Al4V

ROOTT C implant is a one-piece compressive type implant that is specially designed to provide perfect primary stability and is used in clinical situations when horizontal alveolar ridge atrophy is observed.

It can be used in combination with basal implants and allows flap and flapless placement.

It has a unique feature to be bent. This feature makes the prosthetic treatment easier.

The length of the neck is 3 mm.

Divergence or convergence up to 10˚ is possible between this type of implants because the slope of the abutment is 5˚.

If the divergence or convergence between this type of implants is found more than 5˚ then the abutment can be grinded.

The abutment is designed for cemented or conometric (telescopic) type of fixation as well.

Can be used with caution to create single restorations in situations where high primary stability is achieved on placement.

Bendable neck

Depending on the length of the implant the abutment can be bent up to 15 degrees, as long as the implant is placed with high primary stability.

ROOTT Dental Implant. compressive type. diameter 3.5 mm. length 14 mm. material Ti6Al4V

ROOTT C implant is a one-piece compressive type implant that is specially designed to provide perfect primary stability and is used in clinical situations when horizontal alveolar ridge atrophy is observed.

It can be used in combination with basal implants and allows flap and flapless placement.

It has a unique feature to be bent. This feature makes the prosthetic treatment easier.

The length of the neck is 3 mm.

Divergence or convergence up to 10˚ is possible between this type of implants because the slope of the abutment is 5˚.

If the divergence or convergence between this type of implants is found more than 5˚ then the abutment can be grinded.

The abutment is designed for cemented or conometric (telescopic) type of fixation as well.

Can be used with caution to create single restorations in situations where high primary stability is achieved on placement.

Bendable neck

Depending on the length of the implant the abutment can be bent up to 15 degrees, as long as the implant is placed with high primary stability.

ROOTT Dental Implant, compressive type, diameter 3.0 mm, length 8 mm, multiunite, material: Ti6Al4V.

ROOTT M implant with regular multi-unit type abutment is designed just for screw-retained prostheses;

It has a compression thread, just like the other Compressive implants.

Divergence or convergence up to 60˚ is possible between these types of implants because the slope of the abutment is 30˚.

Implant abutment is unique because it has 2,5mm ø fixation screw such dimensions of the screw gives big mechanical resistance comparing to regular 1.6-1.8mm ø fixation screw that can be found in other systems.

It can be used not only for full arc fixed dental prostheses.

The implant’s abutment is similar to M abutment or ROOTT P implant’s abutment.

It can be used in combination with ROOTT P, ROOTT S and ROOTT R implants with multi-unit abutments and allows flap and flapless placement.

Advantages of ROOTT M:

Simple placement
Rich variety of prosthetic solutions
Cement free
Immediate loading
Excellent primary stability in all types of bone
Resistant to higher loads in comparing with ROOTT S
ROOTT M implant packaging

Each implant is delivered in a sterile package with a multifunctional carrier, a two-component holder and labels for clinical records.

Content of each box:

Sterile blister with ROOTT M implant
Multifunction carrier with fixing screw
Two-component holder
Labels for clinical records

SKU: bop
Categories: Regular, Regular, Regular, Regular
Burn out part . external platform . material : POM-C

ROOTT Dental Implant. basal type. diameter 3.5 mm. length 22 mm. material Ti6Al4V

ROOTT B implants are used to create multiple-unit restorations in the upper and lower jaws. They can be placed in extraction sockets and also in healed bone. The structural characteristics allow placement in bone that is deficient in height and width. They can be placed with flap or flapless technique.

ROOTT B dental implant can be used to bypass the mandibular nerve and for the engagement of the cortical bone at the fusion of the pterygoid with the maxilla. Can also be used in combination with Compressive implants.

Can be bent up to 15° after implant placement

Specially polished surface protects from the accumulation of bacteria at the cervical part of the implant.

Ideal for resorbed ridges
Immediate loading
Placement in a socket of an extracted tooth
Excellent protection from inflammation around the dental implant
Adjustment of abutment angle 15 degrees
Each implant is delivered in a sterile package with a two-component holder and labels for clinical records.

Content of each box:

Sterile blister with ROOTT B implant
Two-component holder
Labels for clinical records

ROOTT Dental Implant. basal type. diameter 3.5 mm. length 20 mm. material Ti6Al4V

ROOTT B implants are used to create multiple-unit restorations in the upper and lower jaws. They can be placed in extraction sockets and also in healed bone. The structural characteristics allow placement in bone that is deficient in height and width. They can be placed with flap or flapless technique.

ROOTT B dental implant can be used to bypass the mandibular nerve and for the engagement of the cortical bone at the fusion of the pterygoid with the maxilla. Can also be used in combination with Compressive implants.

Can be bent up to 15° after implant placement

Specially polished surface protects from the accumulation of bacteria at the cervical part of the implant.

Ideal for resorbed ridges
Immediate loading
Placement in a socket of an extracted tooth
Excellent protection from inflammation around the dental implant
Adjustment of abutment angle 15 degrees
Each implant is delivered in a sterile package with a two-component holder and labels for clinical records.

Content of each box:

Sterile blister with ROOTT B implant
Two-component holder
Labels for clinical records

ROOTT Dental Implant. basal type. diameter 3.5 mm. length 18 mm. material Ti6Al4V

ROOTT B implants are used to create multiple-unit restorations in the upper and lower jaws. They can be placed in extraction sockets and also in healed bone. The structural characteristics allow placement in bone that is deficient in height and width. They can be placed with flap or flapless technique.

ROOTT B dental implant can be used to bypass the mandibular nerve and for the engagement of the cortical bone at the fusion of the pterygoid with the maxilla. Can also be used in combination with Compressive implants.

Can be bent up to 15° after implant placement

Specially polished surface protects from the accumulation of bacteria at the cervical part of the implant.

Ideal for resorbed ridges
Immediate loading
Placement in a socket of an extracted tooth
Excellent protection from inflammation around the dental implant
Adjustment of abutment angle 15 degrees
Each implant is delivered in a sterile package with a two-component holder and labels for clinical records.

Content of each box:

Sterile blister with ROOTT B implant
Two-component holder
Labels for clinical records

ROOTT Dental Implant. basal type. diameter 3.5 mm. length 16 mm. material Ti6Al4V

ROOTT B implants are used to create multiple-unit restorations in the upper and lower jaws. They can be placed in extraction sockets and also in healed bone. The structural characteristics allow placement in bone that is deficient in height and width. They can be placed with flap or flapless technique.

ROOTT B dental implant can be used to bypass the mandibular nerve and for the engagement of the cortical bone at the fusion of the pterygoid with the maxilla. Can also be used in combination with Compressive implants.

Can be bent up to 15° after implant placement

Specially polished surface protects from the accumulation of bacteria at the cervical part of the implant.

Ideal for resorbed ridges
Immediate loading
Placement in a socket of an extracted tooth
Excellent protection from inflammation around the dental implant
Adjustment of abutment angle 15 degrees
Each implant is delivered in a sterile package with a two-component holder and labels for clinical records.

Content of each box:

Sterile blister with ROOTT B implant
Two-component holder
Labels for clinical records

ROOTT Dental Implant. basal type. diameter 3.5 mm. length 14 mm. material Ti6Al4V

ROOTT B implants are used to create multiple-unit restorations in the upper and lower jaws. They can be placed in extraction sockets and also in healed bone. The structural characteristics allow placement in bone that is deficient in height and width. They can be placed with flap or flapless technique.

ROOTT B dental implant can be used to bypass the mandibular nerve and for the engagement of the cortical bone at the fusion of the pterygoid with the maxilla. Can also be used in combination with Compressive implants.

Can be bent up to 15° after implant placement

Specially polished surface protects from the accumulation of bacteria at the cervical part of the implant.

Ideal for resorbed ridges
Immediate loading
Placement in a socket of an extracted tooth
Excellent protection from inflammation around the dental implant
Adjustment of abutment angle 15 degrees
Each implant is delivered in a sterile package with a two-component holder and labels for clinical records.

Content of each box:

Sterile blister with ROOTT B implant
Two-component holder
Labels for clinical records

Transgingival Cement Abutment AT4
Material: Ti6Al4V

Gingiva height: 4 mm

ROOTT R is based on a two-piece dental implant with self-tapping thread for maximum prosthetic options for most common and necessary cases with all tools needed. Transgingival cement abutment is used to create single cement-retained restorations in the masticatory area with adjustable height only. Conical shape ensures quality and easy handling in precision.
Horizontal limiting marker preventing abutment from over-shortening
Supplied with BP burnout cap
Ensures stable fixation

Transgingival Cement Abutment AT3
Material: Ti6Al4V

Gingiva height: 3 mm

ROOTT R is based on a two-piece dental implant with self-tapping thread for maximum prosthetic options for most common and necessary cases with all tools needed. Transgingival cement abutment is used to create single cement-retained restorations in the masticatory area with adjustable height only. Conical shape ensures quality and easy handling in precision.
Horizontal limiting marker preventing abutment from over-shortening
Supplied with BP burnout cap
Ensures stable fixation

Transgingival Cement Abutment AT2
Material: Ti6Al4V

Gingiva height: 2 mm

ROOTT R is based on a two-piece dental implant with self-tapping thread for maximum prosthetic options for most common and necessary cases with all tools needed. Transgingival cement abutment is used to create single cement-retained restorations in the masticatory area with adjustable height only. Conical shape ensures quality and easy handling in precision.
Horizontal limiting marker preventing abutment from over-shortening
Supplied with BP burnout cap
Ensures stable fixation

Transgingival Cement Abutment AT1
Material: Ti6Al4V

Gingiva height: 1 mm

ROOTT R is based on a two-piece dental implant with self-tapping thread for maximum prosthetic options for most common and necessary cases with all tools needed. Transgingival cement abutment is used to create single cement-retained restorations in the masticatory area with adjustable height only. Conical shape ensures quality and easy handling in precision.
Horizontal limiting marker preventing abutment from over-shortening
Supplied with BP burnout cap
Ensures stable fixation