ROOTT Dental Implant, compressive type, diameter 3.5 mm, length 14 mm, multiunite, material: Ti6Al4V.

ROOTT M implant with regular multi-unit type abutment is designed just for screw-retained prostheses;

It has a compression thread, just like the other Compressive implants.

Divergence or convergence up to 60˚ is possible between these types of implants because the slope of the abutment is 30˚.

Implant abutment is unique because it has 2,5mm ø fixation screw such dimensions of the screw gives big mechanical resistance comparing to regular 1.6-1.8mm ø fixation screw that can be found in other systems.

It can be used not only for full arc fixed dental prostheses.

The implant’s abutment is similar to M abutment or ROOTT P implant’s abutment.

It can be used in combination with ROOTT P, ROOTT S and ROOTT R implants with multi-unit abutments and allows flap and flapless placement.

Advantages of ROOTT M:

Simple placement
Rich variety of prosthetic solutions
Cement free
Immediate loading
Excellent primary stability in all types of bone
Resistant to higher loads in comparing with ROOTT S
ROOTT M implant packaging

Each implant is delivered in a sterile package with a multifunctional carrier, a two-component holder and labels for clinical records.

Content of each box:

Sterile blister with ROOTT M implant
Multifunction carrier with fixing screw
Two-component holder
Labels for clinical records

ROOTT Dental Implant, compressive type, diameter 3.0 mm, length 14 mm, multiunite, material: Ti6Al4V.

ROOTT M implant with regular multi-unit type abutment is designed just for screw-retained prostheses;

It has a compression thread, just like the other Compressive implants.

Divergence or convergence up to 60˚ is possible between these types of implants because the slope of the abutment is 30˚.

Implant abutment is unique because it has 2,5mm ø fixation screw such dimensions of the screw gives big mechanical resistance comparing to regular 1.6-1.8mm ø fixation screw that can be found in other systems.

It can be used not only for full arc fixed dental prostheses.

The implant’s abutment is similar to M abutment or ROOTT P implant’s abutment.

It can be used in combination with ROOTT P, ROOTT S and ROOTT R implants with multi-unit abutments and allows flap and flapless placement.

Advantages of ROOTT M:

Simple placement
Rich variety of prosthetic solutions
Cement free
Immediate loading
Excellent primary stability in all types of bone
Resistant to higher loads in comparing with ROOTT S
ROOTT M implant packaging

Each implant is delivered in a sterile package with a multifunctional carrier, a two-component holder and labels for clinical records.

Content of each box:

Sterile blister with ROOTT M implant
Multifunction carrier with fixing screw
Two-component holder
Labels for clinical records

ROOTT Dental Implant, compressive type, diameter 5.0 mm, length 10 mm, multiunite, material: Ti6Al4V.

ROOTT M implant with regular multi-unit type abutment is designed just for screw-retained prostheses;

It has a compression thread, just like the other Compressive implants.

Divergence or convergence up to 60˚ is possible between these types of implants because the slope of the abutment is 30˚.

Implant abutment is unique because it has 2,5mm ø fixation screw such dimensions of the screw gives big mechanical resistance comparing to regular 1.6-1.8mm ø fixation screw that can be found in other systems.

It can be used not only for full arc fixed dental prostheses.

The implant’s abutment is similar to M abutment or ROOTT P implant’s abutment.

It can be used in combination with ROOTT P, ROOTT S and ROOTT R implants with multi-unit abutments and allows flap and flapless placement.

Advantages of ROOTT M:

Simple placement
Rich variety of prosthetic solutions
Cement free
Immediate loading
Excellent primary stability in all types of bone
Resistant to higher loads in comparing with ROOTT S
ROOTT M implant packaging

Each implant is delivered in a sterile package with a multifunctional carrier, a two-component holder and labels for clinical records.

Content of each box:

Sterile blister with ROOTT M implant
Multifunction carrier with fixing screw
Two-component holder
Labels for clinical records

ROOTT Dental Implant, compressive type, diameter 4.0 mm, length 12 mm, multiunite, material: Ti6Al4V.

ROOTT M implant with regular multi-unit type abutment is designed just for screw-retained prostheses;

It has a compression thread, just like the other Compressive implants.

Divergence or convergence up to 60˚ is possible between these types of implants because the slope of the abutment is 30˚.

Implant abutment is unique because it has 2,5mm ø fixation screw such dimensions of the screw gives big mechanical resistance comparing to regular 1.6-1.8mm ø fixation screw that can be found in other systems.

It can be used not only for full arc fixed dental prostheses.

The implant’s abutment is similar to M abutment or ROOTT P implant’s abutment.

It can be used in combination with ROOTT P, ROOTT S and ROOTT R implants with multi-unit abutments and allows flap and flapless placement.

Advantages of Compressive M:

Simple placement
Rich variety of prosthetic solutions
Cement free
Immediate loading
Excellent primary stability in all types of bone
Resistant to higher loads in comparing with Compressive MS
Compressive M implant packaging

Each implant is delivered in a sterile package with a multifunctional carrier, a two-component holder and labels for clinical records.

Content of each box:

Sterile blister with Compressive M implant
Multifunction carrier with fixing screw
Two-component holder
Labels for clinical records

ROOTT Dental Implant, compressive type, diameter 4.0 mm, length 10 mm, multiunite, material: Ti6Al4V.

ROOTT M implant with regular multi-unit type abutment is designed just for screw-retained prostheses;

It has a compression thread, just like the other Compressive implants.

Divergence or convergence up to 60˚ is possible between these types of implants because the slope of the abutment is 30˚.

Implant abutment is unique because it has 2,5mm ø fixation screw such dimensions of the screw gives big mechanical resistance comparing to regular 1.6-1.8mm ø fixation screw that can be found in other systems.

It can be used not only for full arc fixed dental prostheses.

The implant’s abutment is similar to M abutment or ROOTT P implant’s abutment.

It can be used in combination with ROOTT P, ROOTT S and ROOTT R implants with multi-unit abutments and allows flap and flapless placement.

Advantages of ROOTT M:

Simple placement
Rich variety of prosthetic solutions
Cement free
Immediate loading
Excellent primary stability in all types of bone
Resistant to higher loads in comparing with ROOTT S
ROOTT M implant packaging

Each implant is delivered in a sterile package with a multifunctional carrier, a two-component holder and labels for clinical records.

Content of each box:

Sterile blister with ROOTT M implant
Multifunction carrier with fixing screw
Two-component holder
Labels for clinical records

ROOTT Dental Implant, compressive type, diameter 3.5 mm, length 12 mm, multiunite, material: Ti6Al4V.

ROOTT M implant with regular multi-unit type abutment is designed just for screw-retained prostheses;

It has a compression thread, just like the other Compressive implants.

Divergence or convergence up to 60˚ is possible between these types of implants because the slope of the abutment is 30˚.

Implant abutment is unique because it has 2,5mm ø fixation screw such dimensions of the screw gives big mechanical resistance comparing to regular 1.6-1.8mm ø fixation screw that can be found in other systems.

It can be used not only for full arc fixed dental prostheses.

The implant’s abutment is similar to M abutment or ROOTT P implant’s abutment.

It can be used in combination with ROOTT P, ROOTT S and ROOTT R implants with multi-unit abutments and allows flap and flapless placement.

Advantages of ROOTT M:

Simple placement
Rich variety of prosthetic solutions
Cement free
Immediate loading
Excellent primary stability in all types of bone
Resistant to higher loads in comparing with ROOTT S
ROOTT M implant packaging

Each implant is delivered in a sterile package with a multifunctional carrier, a two-component holder and labels for clinical records.

Content of each box:

Sterile blister with ROOTT M implant
Multifunction carrier with fixing screw
Two-component holder
Labels for clinical records

SKU: d4210
Category: R 4.2
Drill for R4210

4.2 . length . 10 mm

ROOTT Dental Implant, compressive type, diameter 3.0 mm, length 10 mm, multiunite, material: Ti6Al4V.

ROOTT M implant with regular multi-unit type abutment is designed just for screw-retained prostheses;

It has a compression thread, just like the other Compressive implants.

Divergence or convergence up to 60˚ is possible between these types of implants because the slope of the abutment is 30˚.

Implant abutment is unique because it has 2,5mm ø fixation screw such dimensions of the screw gives big mechanical resistance comparing to regular 1.6-1.8mm ø fixation screw that can be found in other systems.

It can be used not only for full arc fixed dental prostheses.

The implant’s abutment is similar to M abutment or ROOTT P implant’s abutment.

It can be used in combination with ROOTT P, ROOTT S and ROOTT R implants with multi-unit abutments and allows flap and flapless placement.

Advantages of ROOTT M:

Simple placement
Rich variety of prosthetic solutions
Cement free
Immediate loading
Excellent primary stability in all types of bone
Resistant to higher loads in comparing with ROOTT S
ROOTT M implant packaging

Each implant is delivered in a sterile package with a multifunctional carrier, a two-component holder and labels for clinical records.

Content of each box:

Sterile blister with ROOTT M implant
Multifunction carrier with fixing screw
Two-component holder
Labels for clinical records

This line is about a two-piece implant with an active thread for better osseointegration, ensuring perfect stability in the jaw and including a single internal connection, providing a wide range of prosthetic solutions. ROOTT R implant is a single platform with multiple possibilities, ensuring no micro gaps or micro movements. It’s about easy implant usage without compromising precision and comfort.

Suitable for single and multiple unit restorations with delayed and immediate implant placement in the upper and lower jaws in all types of bone tissue. The implant can be placed by a flap or flapless approach. The gold anodized neck is developed for cases of long-term usage when after gingiva lowering to mount on the abutment on top with no need to remove the implant. Implant placement is also possible immediately following a tooth extraction, as long as sufficient bone tissue is available vertically and horizontally.
The prosthetic platform (internal connection) is the same in all sizes of the implants.

Every implant comes with free multi-functional part CRE, which allows you to avoid additional part purchases, as it can be used as healing or temporary abutment, helping you in direct scan and transfer.

Two-piece implant with self-tapping thread:

Excellent primary stability
Free multi-functional part
Conical connection
Extra thin & strong
Each implant is delivered in a sterile package with a multifunctional carrier, a two-component holder, a cover screw, and labels for clinical records.

Content of each box:

Multifunction carrier with fixing screw
Sterile blister with ROOTT R implant
Labels for clinical records
Two-component holder
Cover screw

ROOTT R Dental Implant. root form type. diameter 3.8 mm. length 16 mm. material Ti6Al4V

Classical ROOT FORM or ,,V‘‘ (tapered shape design) form dental implant with active thread (to ensure perfect primary stability) and internal conus connection (platform switching).

Suitable for single and multiple unite restorations with delayed and immediate implant placement in the upper and lower jaws in all types of bone tissue.

The implant can be placed by flap or flapless approach. Implant placement is also possible immediately following tooth extraction, as long as sufficient bone tissue is available vertically and horizontally.

The prosthetic platform (internal connection) is the same in all sizes of the implants!

ROOTT R implant packaging

Each implant is delivered in a sterile package with a multifunctional carrier, a two-component holder, a cover screw and labels for clinical records.

Content of each box:

Sterile blister with ROOTT R implant
Multifunction carrier with fixing screw
Two-component holder
Cover screw
Labels for clinical records

This line is about a two-piece implant with an active thread for better osseointegration, ensuring perfect stability in the jaw and including a single internal connection, providing a wide range of prosthetic solutions. ROOTT R implant is a single platform with multiple possibilities, ensuring no micro gaps or micro movements. It’s about easy implant usage without compromising precision and comfort.

Suitable for single and multiple unit restorations with delayed and immediate implant placement in the upper and lower jaws in all types of bone tissue. The implant can be placed by a flap or flapless approach. The gold anodized neck is developed for cases of long-term usage when after gingiva lowering to mount on the abutment on top with no need to remove the implant. Implant placement is also possible immediately following a tooth extraction, as long as sufficient bone tissue is available vertically and horizontally.
The prosthetic platform (internal connection) is the same in all sizes of the implants.

Every implant comes with free multi-functional part CRE, which allows you to avoid additional part purchases, as it can be used as healing or temporary abutment, helping you in direct scan and transfer.

Two-piece implant with self-tapping thread:

Excellent primary stability
Free multi-functional part
Conical connection
Extra thin & strong
Each implant is delivered in a sterile package with a multifunctional carrier, a two-component holder, a cover screw, and labels for clinical records.

Content of each box:

Multifunction carrier with fixing screw
Sterile blister with ROOTT R implant
Labels for clinical records
Two-component holder
Cover screw

This line is about a two-piece implant with an active thread for better osseointegration, ensuring perfect stability in the jaw and including a single internal connection, providing a wide range of prosthetic solutions. ROOTT R implant is a single platform with multiple possibilities, ensuring no micro gaps or micro movements. It’s about easy implant usage without compromising precision and comfort.

Suitable for single and multiple unit restorations with delayed and immediate implant placement in the upper and lower jaws in all types of bone tissue. The implant can be placed by a flap or flapless approach. The gold anodized neck is developed for cases of long-term usage when after gingiva lowering to mount on the abutment on top with no need to remove the implant. Implant placement is also possible immediately following a tooth extraction, as long as sufficient bone tissue is available vertically and horizontally.
The prosthetic platform (internal connection) is the same in all sizes of the implants.

Every implant comes with free multi-functional part CRE, which allows you to avoid additional part purchases, as it can be used as healing or temporary abutment, helping you in direct scan and transfer.

Two-piece implant with self-tapping thread:

Excellent primary stability
Free multi-functional part
Conical connection
Extra thin & strong
Each implant is delivered in a sterile package with a multifunctional carrier, a two-component holder, a cover screw, and labels for clinical records.

Content of each box:

Multifunction carrier with fixing screw
Sterile blister with ROOTT R implant
Labels for clinical records
Two-component holder
Cover screw

SKU: tom
Categories: Open tray, Open tray, TOM
Transfer for multiunite, open tray,
material: Ti6Al4V.

15° Cement Abutment A3A15
Material: Ti6Al4V
Gingiva height: 3 mm

ROOTT R is based on a two-piece dental implant with self-tapping thread for maximum prosthetic options for most common and necessary cases with all tools needed. 15° angled cement abutment allows to reduce the time usually spent on milling standard abutments and shape allows working with subcrestal position of the implant. Conical shape ensures quality and easy handling in precision.

Anodized gold colour for the comfort of the patient and aesthetics
Tight connection to the implant – preventing micromotions
Can be used for the cementless cementation process

SKU: gf5
Category: Regular
Regular Healing abutment GF5
H (bone level): 6.8 mm
Gingiva height: 5 mm
Material: Ti6Al4V

ROOTT R is based on a two-piece dental implant with self-tapping thread for maximum prosthetic options for most common and necessary cases with all tools needed. ROOTT R healing abutment can help promote soft and hard tissue healing and protect from plaque and debris. Safe to remove and perfect fit of gingiva colour – all for the comfort of the patient.

Visually pleasing colour for simple identification and conceal
Wide variety of sizes in both GF and screw
Precise shape for less tension
Added holes for dental probe
Easily removed with SR tool

SKU: gf2
Category: Regular
Regular Healing abutment GF2
H (bone level): 3.8 mm
Gingiva height: 2 mm
Material: Ti6Al4V

ROOTT R is based on a two-piece dental implant with self-tapping thread for maximum prosthetic options for most common and necessary cases with all tools needed. ROOTT R healing abutment can help promote soft and hard tissue healing and protect from plaque and debris. Safe to remove and perfect fit of gingiva colour – all for the comfort of the patient.

Visually pleasing colour for simple identification and conceal
Wide variety of sizes in both GF and screw
Precise shape for less tension
Added holes for dental probe
Easily removed with SR tool

Straight Cement Abutment A2
Material: Ti6Al4V
Gingiva height: 2 mm

ROOTT R is based on a two-piece dental implant with self-tapping thread for maximum prosthetic options for most common and necessary cases with all tools needed. Straight cement abutment allows reducing the time usually spent on milling standard abutments and securing the lock. Conical shape ensures quality and easy handling in precision.

Anodized gold colour for the comfort of the patient and aesthetics
Tight connection to the implant – preventing micromotions
Can be used for the cementless cementation process

This line is about a two-piece implant with an active thread for better osseointegration, ensuring perfect stability in the jaw and including a single internal connection, providing a wide range of prosthetic solutions. ROOTT R implant is a single platform with multiple possibilities, ensuring no micro gaps or micro movements. It’s about easy implant usage without compromising precision and comfort.

Suitable for single and multiple unit restorations with delayed and immediate implant placement in the upper and lower jaws in all types of bone tissue. The implant can be placed by a flap or flapless approach. The gold anodized neck is developed for cases of long-term usage when after gingiva lowering to mount on the abutment on top with no need to remove the implant. Implant placement is also possible immediately following a tooth extraction, as long as sufficient bone tissue is available vertically and horizontally.
The prosthetic platform (internal connection) is the same in all sizes of the implants.

Every implant comes with free multi-functional part CRE, which allows you to avoid additional part purchases, as it can be used as healing or temporary abutment, helping you in direct scan and transfer.

Two-piece implant with self-tapping thread:

Excellent primary stability
Free multi-functional part
Conical connection
Extra thin & strong
Each implant is delivered in a sterile package with a multifunctional carrier, a two-component holder, a cover screw, and labels for clinical records.

Content of each box:

Multifunction carrier with fixing screw
Sterile blister with ROOTT R implant
Labels for clinical records
Two-component holder
Cover screw

ROOTT R Dental Implant, root form type, diameter 3.5 mm, length 6 mm, material: Ti6Al4V.

Classical ROOT FORM or ,,V‘‘ (tapered shape design) form dental implant with active thread (to ensure perfect primary stability) and internal conus connection (platform switching).

Suitable for single and multiple unite restorations with delayed and immediate implant placement in the upper and lower jaws in all types of bone tissue.

The implant can be placed by flap or flapless approach. Implant placement is also possible immediately following tooth extraction, as long as sufficient bone tissue is available vertically and horizontally.

The prosthetic platform (internal connection) is the same in all sizes of the implants!

ROOTT R implant packaging

Each implant is delivered in a sterile package with a multifunctional carrier, a two-component holder, a cover screw and labels for clinical records.

Content of each box:

Sterile blister with ROOTT R implant
Multifunction carrier with fixing screw
Two-component holder
Cover screw
Labels for clinical records

ROOTT R is based on a two-piece dental implant with self-tapping thread for maximum prosthetic options for most common and necessary cases with all tools needed. 25° angled cement abutment allows to reduce the time usually spent on milling standard abutments and shape allows working with subcrestal position of the implant. Conical shape ensures quality and easy handling in precision.

Anodized gold colour for the comfort of the patient and aesthetics
Tight connection to the implant – preventing micromotions
Can be used for the cementless cementation process

ROOTT R Dental Implant. Diameter 3.8 mm. Length 14 mm. Material Ti6Al4V

Classical ROOT FORM or ,,V‘‘ (tapered shape design) form dental implant with active thread (to ensure perfect primary stability) and internal conus connection (platform switching).

Suitable for single and multiple unite restorations with delayed and immediate implant placement in the upper and lower jaws in all types of bone tissue.

The implant can be placed by flap or flapless approach. Implant placement is also possible immediately following tooth extraction, as long as sufficient bone tissue is available vertically and horizontally.

The prosthetic platform (internal connection) is the same in all sizes of the implants!

ROOTT R implant packaging

Each implant is delivered in a sterile package with a multifunctional carrier, a two-component holder, a cover screw and labels for clinical records.

Content of each box:

Sterile blister with ROOTT R implant
Multifunction carrier with fixing screw
Two-component holder
Cover screw
Labels for clinical records

15° Cement Abutment A4A15
Material: Ti6Al4V
Gingiva height: 4 mm

ROOTT R is based on a two-piece dental implant with self-tapping thread for maximum prosthetic options for most common and necessary cases with all tools needed. 15° angled cement abutment allows to reduce the time usually spent on milling standard abutments and shape allows working with subcrestal position of the implant. Conical shape ensures quality and easy handling in precision.

Anodized gold colour for the comfort of the patient and aesthetics
Tight connection to the implant – preventing micromotions
Can be used for the cementless cementation process

SKU: anms
Category: Implant analog
Analog of multiunite, small, material: Ti6Al4V.

ROOTT R Dental Implant. root form type. diameter 3.0 mm. length 10 mm. material Ti6Al4V

Classical ROOT FORM or ,,V‘‘ (tapered shape design) form dental implant with active thread (to ensure perfect primary stability) and internal conus connection (platform switching).

Suitable for single and multiple unite restorations with delayed and immediate implant placement in the upper and lower jaws in all types of bone tissue.

The implant can be placed by flap or flapless approach. Implant placement is also possible immediately following tooth extraction, as long as sufficient bone tissue is available vertically and horizontally.

The prosthetic platform (internal connection) is the same in all sizes of the implants!

ROOTT R implant packaging

Each implant is delivered in a sterile package with a multifunctional carrier, a two-component holder, a cover screw and labels for clinical records.

Content of each box:

Sterile blister with ROOTT R implant
Multifunction carrier with fixing screw
Two-component holder
Cover screw
Labels for clinical records

SKU: r3014
Categories: Implants, ROOTT R
ROOTT R Dental Implant. root form type. diameter 3.0 mm. length 14 mm. material Ti6Al4V

Classical ROOT FORM or ,,V‘‘ (tapered shape design) form dental implant with active thread (to ensure perfect primary stability) and internal conus connection (platform switching).

Suitable for single and multiple unite restorations with delayed and immediate implant placement in the upper and lower jaws in all types of bone tissue.

The implant can be placed by flap or flapless approach. Implant placement is also possible immediately following tooth extraction, as long as sufficient bone tissue is available vertically and horizontally.

The prosthetic platform (internal connection) is the same in all sizes of the implants!

ROOTT R implant packaging

Each implant is delivered in a sterile package with a multifunctional carrier, a two-component holder, a cover screw and labels for clinical records.

Content of each box:

Sterile blister with ROOTT R implant
Multifunction carrier with fixing screw
Two-component holder
Cover screw
Labels for clinical records

ROOTT R Dental Implant. root form type. diameter 3.5 mm. length 16 mm. material Ti6Al4V

Classical ROOT FORM or ,,V‘‘ (tapered shape design) form dental implant with active thread (to ensure perfect primary stability) and internal conus connection (platform switching).

Suitable for single and multiple unite restorations with delayed and immediate implant placement in the upper and lower jaws in all types of bone tissue.

The implant can be placed by flap or flapless approach. Implant placement is also possible immediately following tooth extraction, as long as sufficient bone tissue is available vertically and horizontally.

The prosthetic platform (internal connection) is the same in all sizes of the implants!

ROOTT R implant packaging

Each implant is delivered in a sterile package with a multifunctional carrier, a two-component holder, a cover screw and labels for clinical records.

Content of each box:

Sterile blister with ROOTT R implant
Multifunction carrier with fixing screw
Two-component holder
Cover screw
Labels for clinical records

ROOTT Dental Implant. compressive type. diameter 4.0 mm. length 8 mm. material Ti6Al4V

ROOTT C implant is a one-piece compressive type implant that is specially designed to provide perfect primary stability and is used in clinical situations when horizontal alveolar ridge atrophy is observed.

It can be used in combination with basal implants and allows flap and flapless placement.

It has a unique feature to be bent. This feature makes the prosthetic treatment easier.

The length of the neck is 3 mm.

Divergence or convergence up to 10˚ is possible between this type of implants because the slope of the abutment is 5˚.

If the divergence or convergence between this type of implants is found more than 5˚ then the abutment can be grinded.

The abutment is designed for cemented or conometric (telescopic) type of fixation as well.

Can be used with caution to create single restorations in situations where high primary stability is achieved on placement.

Bendable neck

Depending on the length of the implant the abutment can be bent up to 15 degrees, as long as the implant is placed with high primary stability.

SKU: spco
Categories: ROOTT R, Scan-post

Transfer for multi-unite, close tray, material: Ti6Al4V.

SKU: tos
Category: Open tray